TRIBORD
Ref.
8576449
2966043
Men's Sailing Waterproof Salopettes Sailing 300 - Navy
€39.99
VAT included
Store Availability
Store availability
Our designers—and fellow sailors—developed these inshore sailing salopettes for sailing in cool and damp weather.
BENEFITS
Waterproof
Tested in moderate rain shower over 2 hrs 15,000 mm Schmerber Zip flapPockets
Leg pocketBreathability
Very breathable coated fabric (RET < 12)TECHNICAL INFORMATIONS
Waterproofing 1/2
We measure the resistance of a fabric to water pressure expressed in mm of water column (based on the ISO 811 standard). The higher the water pressure withstood by the fabric, the more waterproof it is.
Here are the waterproofing ratings:
Component resistant to water pressure of 2000 mm before and after ageing (5 washes). This equates to 15 000 Schmerber - average pressure exerted by the water during rain.
The jacket's waterproofing has been tested in a rain shower with 60 litres of water / m² / hour for 2 hours
Here are the waterproofing ratings:
Component resistant to water pressure of 2000 mm before and after ageing (5 washes). This equates to 15 000 Schmerber - average pressure exerted by the water during rain.
The jacket's waterproofing has been tested in a rain shower with 60 litres of water / m² / hour for 2 hours
How to wash your salopettes?
To maintain the water repellent properties, infrequent washing is recommended.
Close all zips and flaps, empty all pockets and then turn the garment inside out to wash it. You can wash it on a synthetic cycle at 30°C or 40°C with your usual detergent. Do not use fabric softener, which could damage the existing performance of the garment, or bleach.
Very important: choose a full rinse cycle or extra rinse.
Close all zips and flaps, empty all pockets and then turn the garment inside out to wash it. You can wash it on a synthetic cycle at 30°C or 40°C with your usual detergent. Do not use fabric softener, which could damage the existing performance of the garment, or bleach.
Very important: choose a full rinse cycle or extra rinse.
How to reactivate the water repellency of your salopettes?
Drying is a crucial phase in reactivating the water repellent treatment.
We recommend that you lay your anorak flat on a clothes rack and leave it out to dry in the open. Caution: never dry your anorak directly on a radiator.Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.
We recommend that you lay your anorak flat on a clothes rack and leave it out to dry in the open. Caution: never dry your anorak directly on a radiator.Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.
Waterproofing 2/2
- Rip-tab adjustability at the bottom of the leg
- Flap on main zip
- Water-repellent components (water runs off the fabric)
- 100% waterproof seams
- Flap on main zip
- Water-repellent components (water runs off the fabric)
- 100% waterproof seams
Tips for storage and maintenance
Machine wash - 86°F normal cycle
Do not use bleach
Tumble dry low heat
Do not iron
Do not dry-clean
TESTS AND WARRANTY
Warranty
2 Years