UPF 50+ fabric. Sun protection even when wet. Blocks at least 95% of UV rays.
The textile mesh prevents grains of sand from getting stuck.
Product made from 85% recycled polyester for good resistance to wear.
Recommended for occasional use, up to 100 hours of activity.
Easy to put on
Press studs at the back of the collar and at the crotch up to size 24 months
PROTECTION FOR kids
Baby's skin is very sensitive to the sun, because infants' defence systems only become effective after the age of 3. For identical exposure, the effects of the sun are two to three times stronger on a child than on an adult. It is therefore important to protect them effectively.
WHAT DOES UPF 50+ MEAN?
UPF is a sun protection factor (Ultra Violet Protection Factor) and is standardised worldwide.
It defines the protection level of a fabric and more precisely the proportion of UV rays it lets through.
To meet the standards, it must block at least 95 % of UV rays. UPF 50+ means that the fabric blocks at least 95 % of UVA and 98 % of UVB rays.
BEHAVIOUR IN THE SUN?
Although this UV-protection suit provides protection from the sun, other factors such as reflections (from water, sand, etc.), heat, time of day, and so on, must be taken into account. Wearing this suit does not exempt the wearer from following the relevant advice: wear sunglasses, regularly apply suitable sun cream, wear a hat, stay hydrated, etc.
SUSTAINABLE DEVELOPMENT ADDITIONAL INFORMATION
By recycling plastic bottles or used textiles to produce our polyester, we are reducing our use of petroleum-based resources while retaining the qualities and performance of the fabric during use.
Tips for storage and maintenance
Machine wash - 86°F normal cycle
Do not use bleach
Do not tumble dry
Do not iron
Do not dry-clean
Restrictions on use
Only parts of the body covered by the suit are protected.
TESTS AND WARRANTY
UV-protection swimming suit developed and tested by our design teams in Hendaye, France. The components used for this product are laboratory-tested to ensure the best possible quality and durability.
All of our sun protection components are laboratory-tested by our engineers. They meet the current standard: EN 13758-2. We conduct tests on all of the materials used before starting production. We also have our own measuring equipment in our laboratories to supplement the tests conducted in external laboratories. The products are laboratory-tested when wet and dry, as well as in use.