UEFA Europa League Replica Football 2024-2025 Size 5
Our design teams have created an official replica of the UEFA Europa League or UEFA Conference League ball.
Our very first official replica match ball of the UEFA Europa League. Our exclusive kipsta design which incorporates the same technical attributes of the official ball. Play like the pros.
BENEFITS
Bounce
The ball meets FIFA standards in terms of bounce.
Robustness
The ball meets FIFA standards in terms of durability.
Lasting air retention
12% pressure loss in 14 days.
Stable flight
Achieved a score of 5.74 on a protocol-based test. 12 panels.
TECHNICAL INFORMATIONS
Kipsta, supplier of the official UEFA Europa & Conference League ball
The UEFA Board of Directors designated Kipsta, the Decathlon group's football brand, as the new official supplier of the UEFA.
Kipsta premium footballs, designed in France, have been awarded the FIFA Quality Pro label and undergo quality tests at various stages of production.
With the official balls of the UEFA EUROPA LEAGUE & UEFA CONFERENCE LEAGUE, Kipsta wishes to demonstrate its know-how at the highest level of competition.
The durability of our balls
We've developed a tool for characterising the durability of our balls.
Defects that appear in use are identified and assessed through a series of laboratory tests.
These tests enable us to compare the overall strength of our footballs with those available on the market.
Our aim: to have the most durable products on the market.
Designed in France
This ball, just like the whole of our range, is 100% designed in France, and has been rigorously tested by a combination of lab and field tests. So it meets the strictest standards and requirements, as well as complying with a whole range of additional tests, specifically developed by Decathlon.
Apart from normative tests, our Kipsta Certification Unit carries out additional tests, that enable us to design, but also objectively compare our products.
WHAT IS THE KIPSTA CERTIFICATION TEAM?
The Kipsta certification unit is a team made up of qualified field trial engineers, renowned for: establishing specific protocols and tests relating to how the products will be used.
Recruitment of qualified testers with a level suitable to evaluate products' functions.
Objective analysis of results, using statistical tools.
These tests cover general aspects, such as durability, durable inflation, and functions that reflect the ball's technical aspects.
The Kipstadium, in Tourcoing, France
To design our balls, we have a dedicated team, as well as a laboratory based in France. The Ball team in France is made up of product engineers, component engineers and test engineers, which means we are able to master the entire ball design process, from components to technical validation.
Our ball lab
At Decathlon we've been testing our balls for over 15 years in order to validate our products during the design, industrialisation and post-production phases. A laboratory 100% dedicated to ball tests was even created in 2018 at the Kipstadium site in France.
More than a dozen tests are carried out on our balls. First of all, there are the tests required by FIFA, as well as other, additional tests, created by the engineers within our laboratory.
Decathlon, the designer
With 40 years' experience as a designer, Decathlon bases its product development on desirability and accessibility for all, consequently implying a notion of universality in their design (age, gender and nationality).
The group's, and therefore Kipsta's, aesthetic line is a balance between our convictions (simple, technical and clever products) and our sober, universal and modern artistic direction.
Designers as well as engineers
The DNA worked into this ball (i.e. the formal basis on which a graphic design is juxtaposed) combines technical features and balance.
The spatial apprehension and the visual effects linked to the ball during its movements are worked on so as not to cause any visual discomfort to the players, thus supporting the design choice.
The story behind this ball
This ball is an exclusive Kipsta design, and incorporates some of the same technical choices as our Official Match Ball.
What you should know
- It features thermobonded technology: a seamless ball.
- It's made up of 12 panels with an exclusive shape.
Too light? Too heavy? The weight is standardised...
This ball weighs between 410 g and 450 g (size 5) and complies with official FIFA standards.
FIFA Basic approved.
How big is it? What's the circumference?
This ball measures between 68.0 cm and 70.0 cm and complies with official FIFA standards.
FIFA Basic approved.
A "round" ball?
Here's how we test sphericity:
Average measured variation: 1.8% max (FIFA Basic certification).
We measure the football's sphericity at 4500 different points and then examine any differences.
If the discrepancy is greater than 1.8% (FIFA Basic Standard), our engineers are tasked with improving the sphericity to ensure a consistent bounce.
Maximum pressure loss test: here's what we do...
Here's how we test pressure loss: We inflate the ball to the recommended pressure (meaning 0.8 bar).
72 hours later, the ball must not have lost more than 15% of its pressure, meaning approx. 0.1 bar (FIFA Basic certification). The pressure after 72 hours must, therefore, be at approx. 0.7 bar.
This also means that it is quite normal for a ball to lose pressure after a few days.
We've also tested how much water the ball absorbs...
Here's how we test water absorption:
We simulate rainy playing conditions in a lab, leaving the ball to sit in 2 cm of water on a pivoting support whilst subjecting it to 250 compressions.
At the end of the test, the ball must have absorbed no more than 10% of its weight (FIFA Basic certification).
It's all about the bounce
Here's the bounce test:
The ball is dropped onto a steel plate 10 times from a height of 2 metres.
The bounce height must be between 125 and 155 cm with a maximum difference of 10 cm between the ball's highest and lowest bounce.
Not even a scratch!
The most stringent test we put this ball through is the shooting machine test.
The ball must resist 2,500 shoots against a concrete slope at 50 km/h at a distance of 2.5 m.
At the end of the test, we check:
- the ball's general state: stitching must withstand this test
- the circumference: It must not have increased more than 1.5 cm.- the sphericity: it must not have varied by over 1.8%
- the pressure: loss of pressure must not exceed 12.5%.
How about you? What do you think?
We value your feedback and use it to continuously improve our products.A huge thank you in advance for sharing your feedback with us.
COMPOSITION
composition
Outer shell: 100.0% Polyurethane; Bladder: 30.0% Polyester, 70.0% Latex Styrene Butadiene Rubber; Inside shell - Main fabric: 100.0% Polyester
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Do not completely deflate the ball because this will damage the thermobonded panels and reduce the ball's life span and technical properties.<br /> After use, store your ball in a dry and ventilated place.
Restrictions on use
Avoid contact with prickly objects or materials.
TESTS AND WARRANTY
Test product
Compliant with international football federations' most stringent standards.Certified to FIFA Basic standards
Warranty
2 Years
Agree by
FIFA
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 12% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.