ITIWIT
Ref.
8387582
2225385
0-15PSI 12V/15A ELECTRIC PUMP FOR INFLATABLE STAND-UP-PADDLE BOARDS AND KAYAKS
€54.99
VAT included
Store Availability
Store availability
Our team recommends this product to easily and quickly inflate your inflatable stand-up paddle boards to high pressures of up to 15 psi
BENEFITS
Easy to use
Set the pressure, start the pump.Lightweight
Weight: 1.2 kg.Power
Inflates a 300 L SUP to 15 PSI in approximately 12 minutes.Versatility
Has 1 Boston fitting, 1 mini-Boston fitting and 1 high-pressure fitting.Measurement settings
Built-in 0-15 psi pressure gauge.TECHNICAL INFORMATIONS
Connection
Works plugged into a 12V cigarette lighter socket.
WARNING: The car battery must provide at minimum 15A.
Provides pressure of up to 15 PSI (1 bar).
Enables you to inflate low-pressure kayaks (1 to 2 PSI) and stand-up paddle boards (10 to 15 PSI).
WARNING: The car battery must provide at minimum 15A.
Provides pressure of up to 15 PSI (1 bar).
Enables you to inflate low-pressure kayaks (1 to 2 PSI) and stand-up paddle boards (10 to 15 PSI).
SAFETY CONTROL
Make sure that the cigarette lighter plug is fully pushed in to avoid overheating caused by bad electrical contact.
Operation
1/ Connect the pump to the cigar lighter with the car engine running.
2/ Connect the pump hose to the SUP
3/ Select the psi/bar/hpa mode with the arrow button
3/ Pre-set the recommended pressure with the +/- buttons
4/ Start Press ON to inflate.
The pump stops at the set pressure.
2/ Connect the pump hose to the SUP
3/ Select the psi/bar/hpa mode with the arrow button
3/ Pre-set the recommended pressure with the +/- buttons
4/ Start Press ON to inflate.
The pump stops at the set pressure.
Tips for storage and maintenance
Storage tips
Store in a dry place. Avoid dust and sand.
Restrictions on use
Inflate to the pressure recommended by the manufacturer.
TESTS AND WARRANTY
Parts guarantee
Guarantee: 2 years