Bike Inner Tube Repair Kit

1/ Locate the hole on the inner tube.

2/ Rub the surface where the patch will be applied using the sandpaper.

3/ Degrease, clean and dry the surface.

4/ Spread the glue evenly around the hole.

5/ Wait around 1 minute until the glue turns dull.

6/ Place the patch over the centre of the hole (without touching the glue and grippy surface the patch with your fingers) and press hard for at least 1 minute.

7/ Remove the patch's transparent film.

Check that no objects are lodged in the tyre before putting the inner tube back in place.

4 round patches (19 cm diameter)

2 rectangular patches (18 mm x 28 mm)

1 piece of sandpaper

1 rubber cement tube (5 g)

Patches:

Optimal lifespan:5 years at room temperature (16-22°C, 30-70% humidity), out of direct sunlight, in its packaging.

Minimum temperature for repairs: +10°C

Temperature for use: -40°C to +65°C



Tube of dissolving liquid:

Store closed and away from heat sources (highly flammable)

Optimal lifespan:

- 5 closed and never opened

- 6 months once opened, kept closed