Insulated sheath slows down & limits temperature variations (warmth / freezing)
Easy to use
Mouthpiece with on/off switch, large opening for easy filling.
Easy to maintain
Sliding ruler top to fully open bladder and facilitate cleaning.
2 litres, ideal for staying hydrated all day.
Comfortable silicon mouthpiece, at 45° angle to make it easy to put in mouth.
Directions for use
Use water at temperatures between -20°C and +40°C. Do not use: alcohol, fats (dairy products, oils...). In temperatures below 0°C, blow into the pipette after use to flush out the water and reduce the risk of freezing in the pipette and tube.
If the noise of the water shaking around in your backpack bothers you, empty the air contained in your water bladder by turning it upside down and directing air bubbles towards the tube, while sucking it out.
Removable sliding ruler top to fully open bladder and facilitate cleaning.
Sliding seal has hooks so you can hang water pouch in compatible bags.
Mouthpiece with an on / off position (turn the grey part of the teat) to prevent untimely water loss during your outings. To drink you need to place the mouthpiece in the “on” position then suck, pulling on the mouthpiece with the mouth.
Thermal properties / isothermal
The tube on your kit is insulated with a vulcanised expanded thermo-plastic elastomer (TPE-V) sheath and the pipette is protected by a polypropylene (PP) cap. So the drinking water IN THE TUBE will be colder than if there was no insulation and won't freeze so fast in the winter.
The insulation of the sheath doesn't influence the temperature of the water in the water bladder.
Thermal properties (next)
This isothermal product is tested according to the following protocol: the isothermal tube and classic tube are filled with water at room temperature then placed in an environmental room at -15°C. We then measure the time it takes for the water in the tube to get down to 0°C, and then freeze. The thermal performance of the insulated pipette increases the time the water takes to reach 0°C by 27% compared to a classic tube.
Clean the bladder and tube after each use with standard dishwashing liquid. You can use B-TWIN brush + drying hanger kit (code: 631585) particularly if you've had a sugary drink. Do not leave drink in water bladder for longer than 24 hours. Do not put in the dishwasher or microwave.
Rinse the entire product 3 times with clear water before using for the first time.
Materials and regulations
Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.
Weight and dimensions
Volume: 2 litres
Product size: 18 cm x 37 cm
Tube and mouthpiece sizes: Ø 1.2 cm x 100 cm
Tube and mouthpiece weight: 85g
Tips for storage and maintenance
Wash and dry before storing away. Store in a clean, dry place. You can also store your water pouch in the freezer to prevent mould growth.
Restrictions on use
No alcohol, fatty substances, microwave, dishwasher, water > 40°