Back with thick open-cell padding for ventilation | Ventilated shoulder straps
Durable, abrasion-resistant components and assemblies | 10-year warranty
We have reduced environmental impact by dyeing the thread before weaving it
OUR COMMITMENT TO CONSUME LESS WATER WITH THIS PRODUCT
We have improved this product with an eco-design approach.
Textile dyeing requires a lot of water but also produces waste water from the dye baths. We dye every other thread to reduce water consumption and water pollution.
To reduce our impact on the environment, we choose the method of bulk dyeing, by integrating the colour pigments from the manufacture of the yarn (references: 8649342, 8649339, 8649346).
How is volume measured?
The volume of each backpack is measured using a standard method: we fill the main compartment, as well as each pocket, with little balls. Then we empty these balls into a graduated container, which gives the equivalent volume in litres.The capacity of the main volume of this bag is 23L.
We also measured the volume with the 2 exterior side water bottle pockets, whereby its total capacity increases to 25L.
Your comfort above all
To take full advantage of a hike, we devote particular attention to designing comfortable products.
The back, shoulder straps & handle are comfortable because of their thickness and construction composed of different types of foam padding covered with a 3D mesh to improve ventilation & drying.
Back: 5 pads, composed of 2 types of 15mm-thick foam (PE - PU).Shoulder straps: composed of 2 different foams (EVA - PU) 8 to 13mm thick
The chest strap has cushioning, & its height and width is adjustable.
14 pockets and 3 compartments to keep you organised
3 compartments and numerous pockets (14), to separate and organise all your belongings.
1 compartment with secure zip, including 2 pockets for 15” laptop and 13” tablet, raised to avoid impacts.
6 zipped pockets, 1 hidden zipped pocket, 1 6.8” phone pocket (left shoulder strap).
2 expandable and cover-all bottle holders.
1 organiser and 1 key ring.
1 cable hole and 1 pocket for a battery.
1 torch holder
1 strap to connect to a suitcase
The components of the bag are water-repellent so that you can temporarily continue walking/hiking in light rain. Caution: this backpack is not watertight/waterproof and it does not have a rain cover.
If you want to continue walking/hiking in the rain and protect your belongings, we recommend the following model: "20 to 35 L rain cover", which can be viewed on our website, item reference 8734213.
Height : 46 cm | Width: 28 cm | Thickness: 22cm.
This bag can be used as carry-on luggage when travelling by plane as its dimensions meet the airline requirements (IATA). We recommend that you contact your airline for details of the size and weight restrictions on cabin baggage.
Tested for optimum durability and strength
To guarantee the durability of the bag, laboratory tests are conducted on the components and assemblies to replicate the ageing of the backpack.
For example, for a fabric, we test the resistance to abrasion and tearing, the colour fastness when exposed to UV light and washing, and the waterproofing.
We use these tests to guarantee the bags for a period of 10 years from the date of purchase on the receipt.
How to adjust your backpack?
1 - Loosen all straps, shoulder straps and chest belt
2 - Put on the bag
3 - Buckle the chest belt, adjust its height and width
4 - Tighten the shoulder straps (from top to bottom)
5 - Adjust to fit
You’re all set!
How to fill your backpack?
Place the heavy items, e.g. laptop, picnic, etc., in the bottom and in the spaces provided. Pack your clothes around these items. Put the small belongings that you will use during the day (sun cream, map, sunglasses, etc.) in the pockets. Put the water bottle(s) in the outer pockets on the sides that are made for this purpose.
Tips for storage and maintenance
Do not use bleach
Do not tumble dry
Do not iron
Do not dry-clean
Store your backpack in a dry place.
Restrictions on use
Caution: non-waterproof components. Cover not provided.
TESTS AND WARRANTY
It’s in France, at the foot of Mont Blanc, that our design team conceives, designs and creates Quechua products.
We test them in the field with other hikers to make sure that they are comfortable and durable. This backpack has been tested and improved by hikers in different climatic conditions and different environments.
This bag was designed with the help of many customer reviews as well as the comments of hikers. It has been tested and approved by a panel of about 100 hikers hiking in the Haute-Savoie region.
In order to fulfil your requirements, Quechua products are tested in the countryside.
Our teams, as well as a panel of testers (made up of partners, ambassadors and customers) test the products throughout their development right up until they are marketed.