Water bladder - 2L - MT500

Directions for use

Use water at temperatures between -20°C and +40°C. Do not use: alcohol, fatty products (dairy, oils, etc).

In temperatures below 0°C, blow into the pipette after use to flush out the water and reduce the risk of freezing in the pipette and mouthpiece.

If the sound of the water in your bag bothers you, simply empty the air contained in your water pouch by turning it and then directing the air bubbles to the tube while suctioning them.

Functions

Removable sliding ruler top to fully open bladder and facilitate cleaning.

Sliding seal has hooks so you can hang water pouch in compatible bags.

Mouthpiece with an on / off position (turn the grey part of the teat) to prevent untimely water loss during your outings. To drink you need to place the mouthpiece in the “on” position then suck, pulling on the mouthpiece with the mouth.

Care tips

Clean the bladder and pipette after each use with standard dishwashing liquid. You can use B-TWIN brush + drying hanger kit (code: 631585) particularly if you've had a sugary drink. Do not leave drink in water bladder for longer than 24 hours. Do not put in the dishwasher or microwave.

First use

Rinse the entire product 3 times with clear water before using for the first time.

Materials and regulations

Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.

Weight and dimensions

Volume: 2 litres

Dimensions: 18cm x 37cm, tube 100cm

Weight: 105 grams

Available in: 1 L / 2 L / 3L

Durability

For this new water bladder, we have chosen a TPU food-safe film that is 30% more resistant to perforation than the previous EVA film.

We have also improved the design of the connector as well as the quality of your welding, for a more durable product.