RIGGING
10 minutes to set up.
Picture set-up manual provided with the product.
The only tool you may need: a mallet to hammer the securing wedges.
Safety straps to support the boards.
DIMENSIONS
Dimensions when product is set up:
- Height: 94 cm
- Width: 71 cm
- Depth: 59 cm
- Gap between 2 rack bars, vertical storage: 10 cm at the narrowest point (at the back).
- Gap between 2 rack bars, vertical storage: 15 cm at the narrowest point (at the back).
- Weight: 9.2 kg.
RESTRICTIONS OF USE
For use indoors (in the home or garage) or outside while COVERED.
Place away from bad weather.
Be careful to not damage your skegs and boards if the longboard has a large single skeg.
Be careful with worn-out or damaged foam boards that take on water and can “spit out” some water when they are stored vertically without a cover.
CARE INSTRUCTIONS
Our rack is made from 18 mm birch plywood. For more protection we pre-treat it with a varnish cover. To make your rack last longer, we advise you to apply a protective coating from time to time, at least once every 2 years (use an outdoor/micro-porous/pigmented varnish).
WOOD MATERIAL MANAGEMENT
The wood we use for our SURFBOARD RACK is from forests that are managed “SUSTAINABLY” (FSC/PEFC Labels).
DESIGN and TEST IN USE
Product designed and tested by our surfer teams in Hendaye (France). The Olaian global design centre is located on the banks of the River Bidassoa in Hendaye. This allows us to design products in contact with users and in the marine environment.
