Skip to main content
🚚✨ Free delivery on standard orders (up to 29kg) over €100! 🎉

DECATHLON

Inflatable touring kayak 1 person

4.4 out of 5 stars From 65 reviews
65 reviews

Enjoy incredible half-day touring trips on your own, with friends or family in this inflatable kayak for 1 person.

An inflatable kayak with 1 elevated seat for comfortable paddling. Stable and reassuring.

ID 8797817

€199.99
VAT included

  • Pick up at Decathlon

    Loading...

  • Pick up near you

    Loading...

  • Home Delivery

    Loading...

Design benefits

  • easy assembly / dismantling

    Inflation in 6 minutes to a pressure of 1.5 PSI (0.1 bar). Do not overinflate

  • stability

    Side tubes and a wide inflatable floor for good stability.

  • Features

    Design details

    Technical dimensions and weights.

    INFLATED SIZE
    Length: 300 cm
    Width: 95 cm

    FOLDED & BAGGED SIZE
    Height: 62 cm
    Width: 44 cm
    Thickness: 27 cm

    Weight: 11 kg
    Maximum pressure: 0.1 bar (1.5 PSI)

    Seats: 1 seat with a limit of 100 kg (220 lbs).

    Contents: kayak, bag, repair kit, keel

    PUMP NOT INCLUDED
    For use with an Itiwit double-action hand pump with adapters.

    After-sales service

    Spare parts are available for Itiwit kayaks from after-sales service. Visit the workshop at your nearest Decathlon store to collect or order some.

    Directions for use.

    We recommend that you use the product with a buoyancy vest.

    regulations for canoes/kayaks measuring less than 3.50 metres

    Is your canoe-kayak inflatable or rigid and is less than 3.50 metres? You have what is called a beach craft.

    You must always stay within 300 metres of a shelter (any place on the coast where any craft or vessel and its crew can get to safety by anchoring or berthing, and set off again without assistance).

    Buoyancy life vests are not mandatory but strongly recommended to make it easier to get back in the boat if you fall out.

    Inflation recommendations & precautions

    Inflate the floor, then a side tube, then the second one to 50%. Check the positioning of the chambers. Then fully inflate it to a maximum pressure of 0.1 bar (1.5 psi).

    DO NOT OVER INFLATE!
    Ensure the valves are properly closed.

    Install the 3 skegs, unless using on a river with a low water level.

    In the event of EXTREME HEAT, slightly deflate the kayak out of the water to avoid over-inflation, which could damage the kayak.
    Do not leave inflated in direct sunlight: risk of overinflation.

    Easy to disassemble and fold

    New carry bag, backpack style for short distances.
    Easy-clip fins.

    Deflate the kayak by opening the 3 “Boston” valves.
    Fold the lateral tubes down onto the floor.
    Roll, starting from the opposite side to the valves to remove the air.
    Place the rolled-up kayak into the main compartment of the bag.
    Close the zip and tighten using the compression strap.

    More than 3.50 metre canoe-kayak rules

    Your canoe/kayak is rigid or inflatable with at least 2 separate air chambers. It measures more than 3.50 metres. It is approved for sea use by the manufacturer.

    You can paddle up to 2 nautical miles (approx. 3 km) from shore. You must carry a number of items of safety equipment.
    You can find a list of these items via this link: https://www.itiwit.fr/reglementation-pour-faire-du-canoe-kayak

    Seat comfort

    Inflatable seat and low backrest for lumbar support. The seats are positioned according to the number of passengers on board; use the diagrams printed on the floor as a guide.

    Care instructions

    In the event of damage to one of the side chambers, open the side tube lengthways using the zip and remove the chamber.
    The floor can be uncovered by opening the rip-tab fastenings.

    Example 1: the hole is in the side tube; you can use the repair kit to stick on a patch.
    Example 2: the hole is located along a seam; contact the DECATHLON workshop service to exchange the faulty bladder (2-year warranty).

    Glide performance

    Patented bow shape: the front and back ends provide good glide. The V-shaped front of the kayak enables smooth entry into the water.

  • Usage & care

    Instructions

    Download

    Warranty

    2 Years

    Care Instructions

    Storage tips

    Deflate, fold up. Store in a cool, dry place.

    Cleaning

    • DO NOT WASH.

    • DO NOT DRY CLEAN.

    • DO NOT IRON.

    • DO NOT TUMBLE DRY.

    • BLEACHING EXCLUDED.

  • Specifications

    Composition

    Main fabric: 100.0% Polyester;Inside shell - Main fabric: 100.0% Polyvinyl Chloride

  • Testing

    Agree by

    ISO 6185-1 standard. Category IIIB (beach craft) Complies with French Division 240 regulations (sailing up to 300 m from shelter)

    Parts guarantee

    Guaranteed availability of spare parts essential to use of product: 2 years. Availability: 10 years

  • Environmental impact

    With ecodesign, we reduce the environmental impact of our products.

    Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.

    Learn more about our approach
    Environmental Impact

    Designed to reduce environmental impact

    Product that has reduced its environmental impact by 16% thanks to ecodesign actions.

    Read more

    Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.

    Long lasting

    Repairability

    Product designed to be repairable on more than 80% of breakages and failures.

    Read more

    Repairability is the ability to offer a solution in the event of product breakage or failure. The repairability of a product is defined according to 4 criteria: - the availability of instructions on how to repair the product for customers, - the possibility of disassembling the product, - the availability of spare parts, - the price of the repair is lower than purchasing a new product. Our goal is to cover any possible known break or repair possibility a product might have. We think about the life span of a product from the design stage, to ensure that it lasts as long as possible.