ITIWIT
Ref.
8584871
4018931
WATERPROOF DRY BAG 30 L - KHAKI
€34.99
VAT included
Store Availability
Store availability
Our team of fellow paddlers designed this 30 L dry bag with carry straps to protect your belongings from getting wet when doing watersports
BENEFITS
Capacity
Volume to hold your personal belongings for a day's adventure.Easy to transport
Grab handle. Single carry straps to wear it like a backpack.Durability
NEW double PVC-laminated polyester fabric for greater abrasion resistance.Waterproof
When closed properly, it is splash-proof. CAUTION: DO NOT SUBMERGETECHNICAL INFORMATIONS
Precautions for electronic devices
Electronic devices are fragile and valuable. We recommend doubling up their protection by putting phones in waterproof pouches inside dry bags. Cameras can be placed in a small dry bag (5 L or 10 L) inside a large dry bag (30 L, 40 L, 60 L).
Ensure your bags are closed and check water resistance regularly before your session using a paper towel.
DO NOT SWIM WITH THE BAG NEITHER IMMERSE IT UNDERWATER.
Ensure your bags are closed and check water resistance regularly before your session using a paper towel.
DO NOT SWIM WITH THE BAG NEITHER IMMERSE IT UNDERWATER.
Fastening system
To ensure good water resistance:
1/ Carefully roll down the top of the bag 5 times, by tightening the folds across the thickness of the strap.
2/ Fasten the side buckles.
3/ Fasten the centre buckles.
Leave some air in the bag. The bag should look inflated once closed: this makes it more watertight and allows it to float if dropped in the water.
1/ Carefully roll down the top of the bag 5 times, by tightening the folds across the thickness of the strap.
2/ Fasten the side buckles.
3/ Fasten the centre buckles.
Leave some air in the bag. The bag should look inflated once closed: this makes it more watertight and allows it to float if dropped in the water.
ECO-DESIGN
Various eco-design innovations have allowed a 58% reduction in the CO2 impact of the 30L bag.
- The reduction in the number of manufacturing steps has a direct consequence on the decline in necessary resources (water and fuel).
- Using specific non-dyed textiles. The colour is put directly into the outer PVC layer. The dye is one of the most polluting textile processes, so avoiding this step makes it possible to save lots of CO2.
- The reduction in the number of manufacturing steps has a direct consequence on the decline in necessary resources (water and fuel).
- Using specific non-dyed textiles. The colour is put directly into the outer PVC layer. The dye is one of the most polluting textile processes, so avoiding this step makes it possible to save lots of CO2.
Storage
The 5L and 10L bags can be placed inside the 30L, 40L and 60L bags to double the waterproof protection of sensitive objects and to separate belongings.
Technical dimensions
Bag dimensions when full and closed:
Height: 63 cm
Diametre: 26 cm
Usable volume: 30 L
Empty weight: 655 g
Height: 63 cm
Diametre: 26 cm
Usable volume: 30 L
Empty weight: 655 g
Composition
Main fabric 60% polyester, 40% thermoplastic polyurethane
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE 95°C. NORMAL TREATMENT.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
Rinse with clean water and dry the product before storing for long periods to keep the materials in good condition.
Restrictions on use
Not suitable for canyoning or snorkelling (prolonged immersion).
TESTS AND WARRANTY
Test product
WATER RESISTANCE TESTS:
TEST 1: "PUDDLE OF WATER"
The bag is resistant to shallow immersion for 8 hours in 10 cm of water.
This test corresponds to a bag floating in a water-filled boat or to a brief fall into the water.
TEST 2: "SHOWER"
The bag is resistant to a shower of 450 L/m²/h lasting 2 hours.
This test corresponds to heavy rains or splashes from waves.
Parts guarantee
Warranty: 2 years