Construction
Top PE foam - 3 mm at 80 kg/m3 + 2 mm at 64 kg/m3
Core EPS foam 28 kg/m3, 3 ply stringer 12 mm thick
Bottom PE foam - 2 mm 33 kg/m3 + 2 mm 80 kg/m3 and 0.8 mm HDPE film
We’ll fix your board!
Cuts, blisters under the foam? Our workshops can easily repair your foam surfboard.
Please enquire about repair conditions with our in-store teams.
Precautions for use
Be careful, as prolonged exposure to the sun or high temperatures can cause the coating to delaminate. We recommend storing your board in the shade and not inside a vehicle. Tighten the fin screws regularly using the tool supplied to minimise water entry.
If you need to strap the board to a roof rack: we recommend putting the board in a bag. The strap may damage the rail.
Suitability
A fun, leisure-oriented foam shortboard, ideal for waves from 50 cm to 1.2 m (hip to shoulder height). Its square tail will get you through the soft sections, while being as forgiving as possible when you get it wrong. This board will give you pleasure and fun whatever the conditions and whoever’s in the water.
Dimensions
6’2” x 21” 3/8 x 2” 3/8
188 cm x 54 cm x 6 cm -
volume 44 L
3.5 kg
Rigging
1) ensure that the small side screws are unscrewed.
2) Clip the rear of the fin into the notch at the rear of the housing
3) Press to push the fin in horizontally.
4) Screw each screw to the fin. Be careful not to over-tighten as this could damage the fin.
For dismantling: Unscrew the screws using the spanner provided.
