Skip to main content
🚚✨ Free delivery on standard orders (up to 29kg) over €100! 🎉
End of line

SUBEA

Men's diving wetsuit 3 mm neoprene SCD 500 turquin blue

4.6 out of 5 stars From 48 reviews
48 reviews

Our Subea team developed a simple and 3 mm diving suit perfect for divers diving in warm waters (>25°C).

Diving suit for warm waters. Comfortable and easy to put on!

ID 8651294

€39.99
VAT included
Color: Blue / Grey

  • Pick up at Decathlon

    Loading...

  • Pick up near you

    Loading...

  • Home Delivery

    Loading...

Design benefits

  • easy dressing

    One-piece diving suit with back zip.

  • thermal insulation

    3mm full-body diving suit. Seams taped with GBS glued & blind-stitched assembly.

  • freedom of movement

    Anatomic cut frees up arm movement. No seams under the armpits.

  • robustness

    Reinforcements to reduce wear on the knees.

  • Features

    Design details

    Details of thermal insulation and reinforcement

    3 mm full-body one-piece wet type with back zip. Seams taped using a GBS (glued and blind stitched) assembly. Once a thin layer of water (that enters through the zip) gets trapped between your body and the diving suit, the water stays warm as it is not replaced. This thin layer of water keeps you warm.
    The diving suit has printed reinforcements on the knees to reduce wear.

    GBS (glued and blind stitched) assembly

    The diving suit's GBS assembly (Glued and Blind-Stitched) means that the seams are waterproof: the neoprene is glued first of all, then sewn for maximum strength (the sewing needle does not go completely through the neoprene in order to prevent water infiltration).

    Why use a 3 mm diving suit?

    Even in warm waters, the body ends up cooling down (25 times faster than in the air).
    Use a thin 3 mm diving suit that will allow you to delay this drop in temperature so that you can enjoy your activity for longer. In addition, use a full-body diving suit to fully protect you from UV rays and the underwater (coral, etc.).

    Thermal performance class

    This scuba diving suit provides thermal protection that has been tested by the independent INPP institute (Marseille, France) in order to validate its compliance with the current standard (EN 14225-1:2017).

    This diving suit is certified for use in waters warmer than 25°C.

    What is a diving wetsuit?

    This is the most common type of diving suit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside.
    Made of neoprene - a rubber polymer filled with air bubbles - these diving suits are available in thicknesses of 0.5 mm to 7 mm.
    Thanks to their suppleness and modularity, they constitute excellent diving suits.

    Tips on how to get into a diving suit

    Put your foot in a plastic bag. Then put your leg into your diving suit. Your foot comes out completely and smoothly!
    To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene diving suit, immediately separating it from your skin. You can then easily proceed with the final adjustments.

    Tips on how to take care of your diving suit

    1) Soak the inside and the outside of the diving suit in clean water after each session,
    2)Disinfect it with an antibacterial solution,
    3)Rinse well with clean water,
    4) Dry on a wide hanger in a dark and well-ventilated place.
    Caution: the sun will cause the colours of the textile parts of the diving suit to fade and speeds up the ageing process of the neoprene.
    Zips can be cleaned with a toothbrush and lubricated with silicone grease.

  • Usage & care

    Instructions

    Download

    Warranty

    2 Years

    Care Instructions

    Storage tips

    Lay your diving wetsuit out away from sunlight and away from a heat source on a wide hanger, to keep its shape and to preserve its neoprene.

    Usage precautions

    Not advised for swimming or wave sports.

    Cleaning

    • HAND WASH. MAXIMUM TEMPERATURE OF 40°C.

    • DO NOT DRY CLEAN.

    • DO NOT IRON.

    • DO NOT TUMBLE DRY.

    • BLEACHING EXCLUDED.

  • Specifications

    Composition

    Foam: 100.0% Rubber;Lining: 100.0% Polyamide

  • Testing

    Test product

    Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.

    Agree by

    Our technical partner: = Ocean (the PADI 5-star diving centre) based at the Water Sports Centre by Decathlon in Hendaye, France. The centre uses SUBEA diving equipment throughout the year.The team of instructors are rigorously involved in the development of our SUBEA products: from the design phase with the teams (product managers, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).

  • Environmental impact

    With ecodesign, we reduce the environmental impact of our products.

    Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.

    Learn more about our approach
    Long lasting

    Repairability

    Product designed to be repaired in over 80% of breakdowns

    Read more

    Repairing means making it last. To make this happen, we identified the most common breakages to build in practical solutions right from the design stage: easier disassembly and available spare parts. Our goal: empowering you to fix your gear instead of replacing it.

    Long lasting

    Reparability

    Product designed to be repairable on more than 80% of breakages and failures.

    Read more

    Repairability is the ability to offer a solution in the event of product breakage or failure. The repairability of a product is defined according to 4 criteria: - the availability of instructions on how to repair the product for customers, - the possibility of disassembling the product, - the availability of spare parts, - the price of the repair is lower than purchasing a new product. Our goal is to cover any possible known break or repair possibility a product might have. We think about the life span of a product from the design stage, to ensure that it lasts as long as possible.